<listing id="9ldpn"><nobr id="9ldpn"><big id="9ldpn"></big></nobr></listing>

        <video id="9ldpn"></video>

        網站首頁新聞動態產品中心公司資質關于我們合作伙伴
        首頁產品中心DJM產品  
        高錳鋼陶瓷復合扎臼壁
        來源: 點擊數:2991次 更新時間:2020-5-14 10:08:17
        詳細簡紹:
        高錳鋼陶瓷復合鑄造圓錐破襯板(動/靜錐)及鄂破齒板
        The High Manganese Steel matrix ceramic composite Mantle/Concave and Jaw plate
        高錳鋼陶瓷復合鑄造圓錐破襯板(動/靜錐)及鄂破齒板,即在高錳鋼耐磨材料中熔鑄陶瓷顆粒,形成陶瓷金屬復合材料層,這層復合層的耐磨性能可達高鉻材料的2-3倍,同時繼承了高錳鋼的耐沖擊性能,
        通常,基材選用= Mn18Cr2
        熱處理后高錳鋼本體硬度= HB160-220 (沖擊后=HB500)
        陶瓷顆粒硬度= HV1400 
        熱處理后陶瓷顆粒硬度=HRC60-70 
        熱處理后陶瓷顆粒間硬度= HB400-HB500 
        陶瓷復合材料扎臼壁的使用壽命是常規高錳鋼的2倍以上,其適用范圍比高鉻材料更廣泛。
        The High Manganese Steel matrix ceramic composite Mantle/Concave and Jaw plate; That is ceramic particles are fused and cast in the wear-resistant material of High Manganese Steel to form ceramic metal composite layer. The wear-resisting property of the composite layer can reach 2-3 times that of the high chromium material, and it inherits the impact resistance of the High Manganese Steel.
        Normally, the basis material = Mn18Cr2
        Hardness of high manganesesteel after heat treatment (Impact hardness= HB500)
        Hardness ceramic particles= HV1400 
        Hardness ceramic particles afterheat treatment=HRC60-70 
        Hardness between ceramic particles after heattreatment= HB400-HB500 
        The service life of the ceramic composite Mantle/Concave and Jaw plate is more than 2 times that of the High Manganese Steel.
        【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
        上一篇:高鉻陶瓷復合制砂機分料錐,襯板,沖擊塊 下一篇:高鉻陶瓷復合輥套,襯板 ZGM95
          友情鏈接:   DJM-CASTING & FORGING  |  波紋補償器 |  bjjm-bj |  sauter-cn
        環球破碎機網淘寶動態評分SCR脫銷蓄熱式焚燒爐叉車尾氣凈化
        高鉻陶瓷復合_陶瓷復合鑄造_高錳鋼陶瓷復合 - 北京金煤創業科技股份有限公司 2016-2020 @ All Rights Reserved 京ICP備16053533號-1
        郵件:info@djm-bj.com 聯系電話:010-88909291  地址:北京市石景山區古盛路36院1號樓14層1403